Wiring Specialties Trunk Mount Battery Relocation Wiring Kit w/ 200A Breaker
$295.00
Trunk Mount Battery Relocation Wiring Kit
Coming Spring 2022 - contact Sales for additional details and pre-orders.
Check out the video - scroll DOWN!
Please NOTE: This item is NOT ELIGIBLE for coupon discounts. Call Sales!
The kit is designed to wire the power system of a race/performance car with the battery located in the rear / trunk passenger side of the vehicle (to offset the weight of the driver).
The kit is made up of several sub-harnesses to allow for the ideal connection of power in the chassis of a sports vehicle, supplying power from the battery to the PDM and starter/alternator of the specific application. See the diagram picture below for more details.
- Optimize power delivery for total confidence
- Properly AWG sized power wires
- Heavy Duty Ring Terminals crimped on securely
- 200 Amp Circuit Breaker protection included
- Firewall Bulkhead for easy firewall pass-through for the battery cable
This kit is intended to be used with the Wiring Specialties Chassis Harness & PDM Unit, but can be used with other brands, for example using an ARC panel with the ECU Master PDU.
Connect between the battery's negative terminal and a bolt on the chassis
Part B - Battery Positive to Circuit Breaker Cable - 15-inch lengthConnect between the battery's positive terminal and the "BAT" side of the circuit breaker
Connect between the circuit breaker's "AUX" terminal and the interior side of the firewall/ bulkhead pass through. This is the longest portion.
Part D - Firewall to PDM (Optional) - 22-inch lengthIf using a PDM (Power Distribution Module) or any other kind of solid state or switching fusebox, connect this cable between the interior side of the firewall/ bulkhead pass through and the terminal on the PDM/ fusebox.
Part E - Firewall to Starter (2 Lengths Included - 24-inch & 45-inch)Connect between the engine bay side of the firewall/ bulkhead pass through and the engine's starter terminal. This should be connected to the battery connection of the starter, and NOT the starter solenoid connection. There are two lengths of cable available for this section, and both are shipped. Use only one.