GKTech Front LCA Weld In Reinforcement Plates for Nissan 240SX R32 R33
from $64.00
The GKTECH S13/180sx/R32 GTS-T front LCA weld in reinforcement plates have been designed from a 3D scan with the addition of CMM data to help to reinforce your subframe where it needs it most. Laser cut, steel, and dimple died for strength these plates make reinforcement of the front LCA's a heap easier than attempting to do it yourself.
Vehicle Compatibility:
- Nissan 180sx
- Nissan S13 Silvia
- Nissan S14 200SX
- Nissan S15 200SX
- Nissan Skyline R32 GTS-T
- Nissan Skyline R33 GTS-T
- Nissan C33
- Nissan A31 Cefiro
FAQ'S
Will this fit my car?We can only confirm fitment for the vehicles listed above under "vehicle compatibility". If your car is not listed there, then we don't know if it will fit.Do you make these to suit other cars?We do. We make a range of these. Please check our website for alternate versions.What's the advantage of using the GKTech weld in kit?Strength. The OEM LCA's are not strong by any means. They flex quite a lot and by boxing these in the ridgidity increases exponentially.What modifications are required, is this hard to fit?No modifications are required, simply weld the plates in.
Is there anything else needed for installation?You will need a welder. In terms of the kit, it will arrive as shown in the product photo.Can I install this myself? If so how long will installation take?Yes, provided you have welding experience. Welding in of the kit should take around 30 minutes.