Wisefab Mitsubishi EVO7/8/9 Front Suspension Kit

Mitsubishi EVO is good performance car designed for rally. Because of good performance it is more and more used for grip racing. Lowering the car will give more grip and better handling, but then the factory designed kinematics won’t work as they are supposed to. Wisefab suspension kit brings the roll center, bumpsteer and camber curve back to normal range, providing better roll stiffness, handling and grip.

This kit can be installed on EVO 7; 8; 9 as well as to predecessor EVO 6*
• -15 kg of combined weight saving over original components
But still maintaining required strength and stiffness
• 7075-T6 aluminium billet CNC knuckles and arms
With optimized double shear design that provides low weight and high strenght
• CrMo rod ends and sphericals used instead of OEM style bushings
• Quicker steering ratio
Steering ratio is slightly quicker compared to OEM
• Separate camber, caster adjustments
The kit comes with camberplates that have separate camber and caster adjustment. Initially the caster is set to 4,7 degrees
• The standard 17“ or bigger wheel can be used
If standard wheels are used, then there are no modifications needed to the chassis. If the wheels are wider to outside, then wider front fenders will be needed
• Mounting points for both EVO 7, 8, 9, or 10 brake calipers
• EVO CV joints are known to be very good to handle big power
If power and grip exeeds their limits, then the uprights have room for bigger CV joints if needed
Kit includes:
• Adjustable camber and caster top mounts
• Knuckles with hardware
• Lower control arms
• Assembled tie rods
• Installation guide
Other information:
• This kit assumes coilovers
• Minimum rim size is 17“
• Original wheel speed sensor can be used
* Installation to EVO 6 chassis requires minor subframe modification to fit the supplied levers!