DINAN FRONT CAMBER PLATES - 2012-2021 BMW M235I M240I 228I 230I 320I 328I 330I 335I 340I 428I 430I 435I 440I

DINAN CAMBER PLATES - 2012-2021 BMW M235I/M240I/228I/230I/320I/328I/330I/335I/340I/428I/430I/435I/440I
Front - F20/F22/F30/F31/F34

Dinan's F2x F3x Camber Plates allow an impressive 43mm of total camber adjustment (30 degrees negative, 13 degrees positive) providing for a more aggressive negative camber setting that dramatically improves grip in the turns for reduced understeer and razor-sharp turn-in. The positive adjustment range on the camber plates is unique to Dinan and allows the end-user, if desired, to retain OEM camber settings on a lowered car or to combat excessive negative camber brought upon by springs that aggressively lower the car. Not only do the Dinan camber plates provide a wide range of adjustments but they also have ride quality in mind like all of Dinan's suspension components and are designed to properly retain the bumpstop so that it compresses as designed from the factory. There is no reason for camber plates to wildly inhibit ride quality if engineered properly. Dinan camber plates are also built to take a beating and are the only ones that utilize a steel alloy mount plate that will resist deforming from pot holes on the street or curb hopping at the track.
Aggressive drivers will benefit from reduced outside edge tire wear as well.
Please note there is a possible increase in road noise with the use of the Dinan F2x F3x camber plate kit. Warranty applies to all parts except for the spherical bearings.
Features:
43mm of total camber adjustment (30 negative, 13 positive from OEM). This translates to 2.5 degrees of negative camber and just over a degree of positive camber being possible.
Decreased understeer
Decreases outside edge tire wear
Steel alloy mount plate and not aluminum
Fits with factory strut tower weather seal