GSC Power-Division Billet S3 Camshaft set for Subaru EJ255/7 with Intake AVCS
$956.25
GSC Power-Division billet S3 camshafts for the USDM STi and WRX with Intake only AVCS. These camshafts are built to suit high horsepower cars with a power range of 750-1000 WHP and a rev range of 4500-9500 RPMs. Specific engine modifications are required to utilize the true potential of these camshafts including a built bottom-end (sleeved or closed deck reccomended), built/ported heads (casting must be clearanced for higher lift), and upgraded valve springs. A standalone ECU or tune with speed density is highly reccomended in order for proper idle characteristics.
GSC Power-Division billet S3 camshafts for the USDM STi and WRX with Intake only AVCS. These camshafts are built to suit high horsepower cars with a power range of 750-1000 WHP and a rev range of 4500-9500 RPMs. Specific engine modifications are required to utilize the true potential of these camshafts including a built bottom-end (sleeved or closed deck reccomended), built/ported heads (casting must be clearanced for higher lift), and upgraded valve springs. A standalone ECU or tune with speed density is highly reccomended in order for proper idle characteristics.
• Check Pictures for cam placement. Long nose = Left Side, short nose = Right Side
• Due to the lobe size, head castings will need to be filled down slightly for clearance - Please check during install
• Proper break in and running high zinc oil is a must on flat tappet engines.
• Must be installed by an experienced technician
Intake = 280 Duration, 11.55mm lift
Exhaust = 280 Duration, 11.60mm lift