Injector Dynamics 1340cc Injectors - 60mm Length - 11mm Blue Top - 14mm Lower O-Ring (Set of 6)

Injector Dynamics 1340cc Injectors - 60mm Length - 11mm Blue Top - 14mm Lower O-Ring (Set of 6)

The ID1300x² is an all new injector, designed in partnership with Bosch Motorsport. This collaboration has given us the ability to design a high flow injector with characteristics specific to the needs of the motorsport tuner. The ID1300x² was designed with alternative fuels in mind, and was originally the only performance injector available with all stainless internals. It is compatible with all known fuels, and will stand up to the corrosive nature of alcohol better than any injector on the market.
While the ID1300x² was designed with an eye towards ethanol fueled engines, we have accounted for the occasional need to convert back to gasoline. The ID1300x² has a minimum fuel mass compatible with gasoline use, and will provide exceptional idle and cruise behavior under these conditions. In addition to its multi-fuel capabilities, the compact body of the ID1300x² allows fitment in 200+ applications, making it the most versatile injector in our lineup.

Basic Specifications
Nominal Flow Rate 1335cc/min @ 3.0 Bar (43.5 psi) Using Iso Octane at 52 Degrees C (125 Degrees F)
Maximum Differential Fuel Pressure 7.0 Bar (101.5 psi)
Fuel Compatibility Compatible With All Known Fuels (Designed Specifically for Alternative Fuels)
Electrical Connector USCAR

Fitment:
Nissan 300ZX TT 90-96 (11mm)
Toyota Supra Turbo 2JZ-GTE (11mm)


All Injector Dynamics Injectors are TOP FEED style and may require an aftermarket Top Feed style rail depending upon application. Also, adapters may be required to fit your engine harness to these new injectors depending upon your application