Circuit Performance CP24 15x8 Gloss Black/Machined 4x100 [+25mm]
$123.99
This is a Circuit Performance CP24 Wheel. It’s got a 15 inch diameter, 8 inch width, a 4×100 bolt pattern and an offset of +25mm
• Classic Style Work Equip 03 Replica Rims
• 3.75″ Machined step lip, a very generous size for a wheel with this high of an offset
• Compatible with all 0.453″ valve stems and TPMS sensors
• Lug seating for tuner style lug nuts, with a 60 degree conical base
Circuit Performance CP24 Wheels offer a classic Equip 03 style mesh spoke with a deep stepped lip design. A classic JDM style that looks great on a wide range of 4×100 vehicles.
Design
The Circuit Performance CP24 has styling similar to Work Equip 03 rims, a classic JDM wheel with roots dating back to the 1970s and 1980s. It’s a timeless design that’s been around for decades and isn’t going out of style anytime soon. It’s unique because the 4 lug holes are integrated in the mesh-spoke design rather than a traditional circular lug pocket. The center of the rim is finished off nicely with a flush mount Circuit Performance logo center cap, included with each wheel.
Fitment
This wheel is a single-drilled 4 Lug, so it will only fit vehicles with a 4×100 bolt pattern. It’s 15×8 which means it has a 15″ diameter and an 8″ width. The offset is +25mm which means the mounting pad is 25mm forward of the centerline of the wheel. The centerbore in the back of the wheel is 73.1mm, so it can easily be hub centric to any vehicle by using a hub centric ring during installation. It is a great size for most 4×100 vehicles because it has a flush fitment without being overly aggressive.
Finish
This wheel features a two-tone black and machined finish which has a high gloss clear coat. The wheel is painted black, before the face of the wheel is machined to a natural aluminum reflective surface on the entire front face of the rim. The perimeter of the wheel has 16 black rivets permanently bonded to the wheel, which gives the wheel a 2 piece look. The 3.75″ stepped lip is machined to a highly reflective shine, and clear-coated for protection so it will not require re-polishing or re-plating.