Mako Motorsports S13 Dash Display Kit
from $239.00
Fully Customizable
Regardless of what you want to mount, we have you covered. Any car. Any screen. Any light. Any gauge.
Simple Bolt-in Installs
We do the hard work so you don't have to. Simply pull out your OEM cluster and use the same screws to install your new dash mount. These are the easiest and cleanest installs possible.
Each Mako Motorsports dash kit is built to order and generally will take roughly 2-3 weeks to build out prior to shipping. These kits will ship direct from the manufacturer in Australia, so please allow 7-12 business days in shipping time as well.
There are also options to have 52mm or 60mm gauge holes on the left and right side of most displays, as well as 12mm LED lights for things such as turn signal, high beam, low beam, fuel, CEL, oil pressure, seat belt and many other indicator lights. If you wish to add these custom features please e-mail a sales rep directly at Sales@EnjukuRacing.com to configure your order.
The S13 mounts have very little clearance below the bottom edge. In order to get a clean install of larger dashes you will need to cut into the plastic and grind down the metal bolts below the cluster to create room for the lower edges of these displays.
The dashes which need cuts to be made are the:
- HALTECH IC-7
- AEM CD7
- EMTRON ED7
- AIM MXG
- MOTEC C127
- MICROTECH 7"
- PLEX SDM700
Additionally, the AEM CD7 and Emtron CD7 will need to be further altered as these displays are taller and the steering column bracket will need to be altered as well. This is a significantly larger job than simply grinding the bolts down for the other 7" displays. We recommend using a different 7" display or using the CD5 or ED5 display to avoid this extra work.