Vargas Turbo VTT B58 "G11" Thermal Dispertion Phenolic Spacer

VTT is proud to offer a Phenolic spacer for the BMW B58 platform. This is a MUST when upgrading to an aluminum charge cooler. With the upgraded cooler you get the benefit of a better core, and more cooling capacity, but it also comes with the downside of DIRECT aluminum-to-aluminum heat transfer from the head to the manifold which can cause heat soak and less-than-ideal IATs even with an upgraded charge cooler. We manufacture these from G11 Expoxy sheet which has great heat and hardness characteristics, and we feel is the ideal material for this application. The thickness is 8mm. The spacer is machined to accept factory O-rings for a perfect seal, and they are included \n \nWhat's included: \n

\n
• One g11 Phenolic spacer
\n
• One Set of O-rings
\n

\nFeatures \n

\n
• 8mm Thick
\n
• Will reduce heat transfer from the head to the charge cooler, which will reduce IAT's
\n
• Perfect for drag racers who see heat soak while in the staging lanes
\n
• Great for all types of racing where heat soak is an issue
\n
• Similar in composition and properties to G-10 phenolic
\n
• High mechanical strength
\n
• Low water absorption
\n
• Low dissipation factor
\n
• Retains 50% or more of its structural strength when exposed to temperatures over 300°F
\n
• Mil-I-24768/3, Type GEB
\n

\nG11 Specs: \n \nG-11 has similar mechanical properties and composition to G-10 phenolic, including high mechanical strength, low water absorption, and a low dissipation factor. Compared to G-10, G-11 is more suited for continuous use at higher temperatures, making it ideal for the most critical high-heat applications. It retains 50% of its structural strength at elevated temperatures in excess of 300°F. \n \nG-11 sheets comply with the requirements of Mil-I-24768/3, Type GEB. \n \n  \n

Please note: Longer studs or bolts may be required introducing a phenolic spacer into your system