PRL Motorsports 2016-2021 Honda Civic 1.5T Intercooler Charge Pipe Upgrade Kit

PLEASE ALLOW AN ADDITIONAL TWO WEEKS FOR POWDERCOATED INTERCOOLERS TO BE PROCESSED AND SHIPPED.
Fits all 2018+ Accord 2.0T & 1.5T
Fits 2019-2020 Acura RDX 2.0T with Minor Modification
Fits 2021+ RDX 2.0T with Minor Modification REQUIRES INTERCOOLER INSTALL KIT
Fits 2021+ TLX 2.0T with Minor Modification REQUIRES INTERCOOLER INSTALL KIT
Fits all variant models including 10AT, 6MT, RHD, International Models, Etc.


Important Notes:
• NO ECU CALIBRATION REQUIRED
• Intercooler Torque Spec: 18 ft/lb
• OEM Honda Part Number 19710-6A0-A11 or 19710-6A0-A01
Technical Notes:
It’s no secret that Honda’s newer turbo platforms are extremely susceptible to heat-soak, especially when retaining the factory intercooler. Excessive heat-soak increases the risk of detonation and causes major power-loss due to high charge air and cylinder temperatures. These issues become even more prevalent with spirited driving and/or increased power outputs.
The PRL Motorsports intercooler upgrade decreases charge air temperatures while increasing potential airflow with its dense 27 x 3.5 x 7.25" 550+ horsepower rated bar-and-plate core. Our intercooler core which increases surface area by 85% and internal flow by 83% to allow optimal cooling and airflow.
This intercooler utilizes factory mounting spots with cast aluminum end tanks as well as all factory air ducts/shrouds. *To maintain consistency with most of our PRL product line, no cutting, fitting or trimming is required. Kits will come with all hardware needed for a seamless install.

Performance Gains:
• Mid-range & top-end power gains
• Major drop in post charge air temperature at peak
• Increased efficiency & consistency in power delivery
• Increased engine safety
Kit Includes:
• (1) Intercooler Assembly
• (1) Cardboard Stencil w/ “PRL” Logo
• (1) Buna O-Ring
• (1) 304 Stainless Worm Clamp
Fits all 2016-2021 Civic 1.5T
Fits all variant models including Si, CVT 6MT, RHD, International Models, Etc.

Important Notes:
• NO ECU CALIBRATION REQUIRED
• ONLY FITS PRL MOTORSPORTS INTERCOOLER UPGRADE. V1 (CAST END TANK) INTERCOOLER DOES NOT REQUIRE ADAPTER
• PLEASE EMAIL SUPPORT@PRLMOTORSPORTS IF PAIRING WITH OUR ORIGINAL V1 INTERCOOLER

Technical Notes:
Our upgraded charge pipe kit utilizes smooth flowing, larger inner diameter hot (1.50" factory compared to 2.00") and cold-side (1.5" factory compared to 2.5") for increased airflow and factory diameter hot-side outlet to aid in turbocharger spool. 4-ply silicone couplers are used throughout our design for a couple of reasons:
1. Heat-soak reduction: Silicone hose offers extremely low thermal heat transfer properties, especially in comparison to steel or aluminum.
2. Strength and rigidity: The rubber hoses used from the factory are known to experience expansion, which worsens as boost is increased. In time, the rubber construct weakens, causing increased likeliness of a boost leak. Our high-temp, 4-ply silicone with handle the high temperatures of the turbocharger much better than the factory rubber hose(s).
3. Smooth airflow: Custom molded silicone allows us to offer much higher flowing bends than we could with metal tubing.
4. Optimal fitment: We have found that the factory rubbers hoses don't offer the most desirable fitment, especially when paired with an aftermarket radiator. Our silicone hose(s) offer even better fitment than factory.
Kits will come with all hardware needed for a seamless install.

Performance Gains:
• Increased efficiency & consistency in power delivery
• Increased flow over stock charge pipe application

Kit Includes:
• (1) Hot Side Charge Pipe
• (1) Cold Side Charge Pipe w/ Auxiliary Service Port & Machined Billet Aluminum Flange
• (1) -4AN O-Ring to 1/4" Hose Barb (Pre-Installed in Cold Side Charge Pipe) to retain factory vacuum connection
• (1) 1/8” NPT Pipe Plug (Pre-Installed in Auxiliary Service Port Bung)
• (1) Mounting Bracket for Cold Side Charge Pipe
• (4) 4-Ply Silicone Coupler
• (8) 304 Stainless Steel Worm Clamp
• (2) Charge Pipe Adapters