Anderson Composites HOOD CHEVROLET CAMARO TYPE-TSII 2010-2015

Anderson Composites VIP carbon fiber parts are manufactured by spraying a coat of resin on the mold, sheets of carbon fiber fabric are laid out across the mold and then a final coat of resin is applied on the fabric before being placed inside a vacuum sealed bag to cure (provides an excellent fabric-to-resin ratio). Once cured, the part is removed from the mold, trimmed and a final coat of gel coat applied and polished to protect the surface and increase the high luster finish. No additional clear coat is required.

Anderson Composites 2010 - 2015 CAMARO TYPE-TSII CARBON FIBER HOOD

Type-TSII carbon fiber hood for 2010-2015 Camaro (Large Vents)

*Vents are larger for increased heat extraction as compared to our Type-TS hood
*Mesh screens are removable and paintable
*Mounts with OE hardware
*Carbon fiber hood (A side) bonded to fiberglass "skeleton" (B side)
*Vacuum infused process with 3K, 2x2 twill carbon fiber cloth, gloss finish
*All hoods require hood pins for safety reasons. Anderson Composites will not be liable for any damages to the product and the vehicle caused by not properly using hood pins - AeroCatch or Quic-Latch
*Heat shield required
*Always carefully close a composite hood. Slamming or dropping the hood may cause it to crack.
*Anderson Composites does not suggest re-installing gas shocks/dampers/struts
*The use of a hood prop rod is highly recommended