Anderson Composites HOOD CHEVROLET CORVETTE C6 TYPE-TS 2005-2013

Anderson Composites VIP carbon fiber parts are manufactured by spraying a coat of resin on the mold, sheets of carbon fiber fabric are laid out across the mold and then a final coat of resin is applied on the fabric before being placed inside a vacuum sealed bag to cure (provides an excellent fabric-to-resin ratio). Once cured, the part is removed from the mold, trimmed and a final coat of gel coat applied and polished to protect the surface and increase the high luster finish. No additional clear coat is required.

Anderson Composites 2005 - 2013 CORVETTE C6 TYPE-TS CARBON FIBER HEAT EXTRACTION HOOD

Type-TS carbon fiber heat extraction hood for 2005 - 2013 Chevrolet Corvette C6

*Metal mesh screens are removable and paintable

*Mounts with OE hardware, hinges and latch

*Latch bracket (u bolt) will need to be transferred from OE hood

*Location for hood latches may be required to be modified.

*Hood pins required for safety reasons - AeroCatch or Quic-Latch

*Heat shield required

*Always carefully close a composite hood. Slamming or dropping the hood may cause it to crack.

*Anderson Composites does not suggest re-installing gas shocks/dampers/struts

*The use of a hood prop rod is highly recommended