Anderson Composites HOOD DODGE CHALLENGER TYPE-OE 2008-2014

Anderson Composites VIP carbon fiber parts are manufactured by spraying a coat of resin on the mold, sheets of carbon fiber fabric are laid out across the mold and then a final coat of resin is applied on the fabric before being placed inside a vacuum sealed bag to cure (provides an excellent fabric-to-resin ratio). Once cured, the part is removed from the mold, trimmed and a final coat of gel coat applied and polished to protect the surface and increase the high luster finish. No additional clear coat is required.

Anderson Composites 2008 - 2014 CHALLENGER CARBON FIBER TYPE-OE HOOD

Carbon fiber Type-OE hood for 2008-2014 Dodge Challenger

* Mesh screen is removable and paintable
* Mounts with OE hardware, hinges and latch
*Vacuum infused process with 3K, 2x2 twill carbon fiber cloth, gloss marine grade gel-coat finish
* Carbon fiber hood (A side) bonded to fiberglass "skeleton" (B side)
* Weighs approximately 24.1 lbs.
*All hoods require hood pins for safety reasons. Anderson Composites will not be liable for any damages to the product and the vehicle caused by not properly using hood pins - AeroCatch or Quic-Latch
* Heat shield required
* Always carefully close a composite hood. Slamming or dropping the hood may cause it to crack.
* Anderson Composites does not suggest re-installing gas shocks/dampers/struts
* The use of a hood prop rod is highly recommended