Anderson Composites HOOD DODGE CHALLENGER HELLCAT REDEYE TYPE-RE 2019-2019

Anderson Composites VIP carbon fiber parts are manufactured by spraying a coat of resin on the mold, sheets of carbon fiber fabric are laid out across the mold and then a final coat of resin is applied on the fabric before being placed inside a vacuum sealed bag to cure (provides an excellent fabric-to-resin ratio). Once cured, the part is removed from the mold, trimmed and a final coat of gel coat applied and polished to protect the surface and increase the high luster finish. No additional clear coat is required.

Anderson Composites 2019 - 2021 DODGE CHALLENGER HELLCAT REDEYE TYPE-RE CARBON FIBER HOOD

Type-RE (Dual Snorkel Style) carbon fiber hood for 2019-2021 Dodge Challenger Hellcat/Redeye

*Functional air scoop works with Redeye "Air-Grabber" intake system
*Fits 2008-23 Challenger and 2015-23 Hellcat (may require CAI modification)
*2008-14 Challenger requires windshield washer modification
*Mounts with OE hardware, hinges and latch
*Vacuum infused process with 3K, 2x2 twill carbon fiber cloth, gloss marine grade gel-coat finish
*Carbon fiber hood (A side) bonded to fiberglass "skeleton" (B side)
*Hoods are hand crafted and weigh approximately 29.1 lbs. (stock hood weighs 30.5 lbs.)
*Small imperfections such as wavy weaves are inevitable due to the size and shape of the hood scoop.
*All hoods require hood pins for safety reasons. Anderson Composites will not be liable for any damages to the product and the vehicle caused by not properly using hood pins - AeroCatch or Quic-Latch
*Heat shield required
*Anderson Composites does not suggest re-installing gas shocks/dampers/struts
*The use of a hood prop rod is highly recommended
*Hand crafted; approximate weight 29.1 lbs.