Anderson Composites HOOD DODGE VIPER TYPE-ACR 2002-2009

Anderson Composites VIP carbon fiber parts are manufactured by spraying a coat of resin on the mold, sheets of carbon fiber fabric are laid out across the mold and then a final coat of resin is applied on the fabric before being placed inside a vacuum sealed bag to cure (provides an excellent fabric-to-resin ratio). Once cured, the part is removed from the mold, trimmed and a final coat of gel coat applied and polished to protect the surface and increase the high luster finish. No additional clear coat is required.

Anderson Composites 2003 - 2010 VIPER CARBON FIBER TYPE-ACR HOOD

Type-ACR carbon fiber hood for 2003-2010 Dodge Viper
-Fits 03-06 SRT, 08-10 SRT-10, SRT-10 ACR

*Vacuum infused process with 3K, 2x2 twill carbon fiber cloth, gloss finish

*Carbon fiber hood (A side) bonded to fiberglass "skeleton" (B side)

*Mesh screen is removable and paintable

*Mounts with OE hardware, hinges and latch

*All hoods require hood pins for safety reasons. Anderson Composites will not be liable for any damages to the product and the vehicle caused by not properly using hood pins - AeroCatch or Quic-Latch

*Heat shield required

*Always carefully close a composite hood. Slamming or dropping the hood may cause it to crack.

*Anderson Composites does not suggest re-installing gas shocks/dampers/struts

*The use of a hood prop rod is highly recommended

*Shipped via ground truck freight only