Anderson Composites ROCKER PANEL SPLITTER FORD MUSTANG TYPE-AR 2015-2023

Anderson Composites VIP carbon fiber parts are manufactured by spraying a coat of resin on the mold, sheets of carbon fiber fabric are laid out across the mold and then a final coat of resin is applied on the fabric before being placed inside a vacuum sealed bag to cure (provides an excellent fabric-to-resin ratio). Once cured, the part is removed from the mold, trimmed and a final coat of gel coat applied and polished to protect the surface and increase the high luster finish. No additional clear coat is required.

Anderson Composites 2015 - 2023 MUSTANG CARBON FIBER TYPE-AR SIDE ROCKER PANEL SPLITTERS (PAIR)

Type-AR carbon fiber side rocker panel splitters for 2015-2023 Ford Mustang
-Fits Bullitt, EcoBoost, EcoBoost Premium, GT, GT Premium, V6, Mach 1

*Type-AR splitters with deeper "planes" reduce lift by blocking air along the sides of the vehicle and reduces air from flowing underneath the Mustang.
*Reduced lift adds stabilization to the car during high-speed track driving and improves traction.
*Vacuum infused process with 3K, 2x2 twill carbon fiber cloth, gloss finish
*Requires side rocker panel to be removed, install carbon fiber splitters onto rocker panel, re-install as an assembly.
*Mounts with OE hardware
*Does not include two (2) replacement ¼” x ½” rivets (drill and rivet tool required)
*Mounting tabs may require modifications for correct fitment; minor adjustments may be necessary as part of the normal installation process
*Lower mounting holes may be required to be enlarged
*Additional clips and hardware may be required to optimize installation
*Use trim & panel tool kit when removing OE rockers
*Underside may have have imperfections such as wavy weaves, small bubbles and clear finish blemishes
*Shipped via ground truck freight only