Anderson Composites DECKLID FIBERGLASS FORD MUSTANG TYPE-ST 2015-2023

Anderson Composites VIP carbon fiber parts are manufactured by spraying a coat of resin on the mold, sheets of carbon fiber fabric are laid out across the mold and then a final coat of resin is applied on the fabric before being placed inside a vacuum sealed bag to cure (provides an excellent fabric-to-resin ratio). Once cured, the part is removed from the mold, trimmed and a final coat of gel coat applied and polished to protect the surface and increase the high luster finish. No additional clear coat is required.

Anderson Composites 2015 - 2023 MUSTANG FIBERGLASS TYPE-ST DECKLID WITH INTEGRATED SPOILER

Type-ST fiberglass decklid with integrated spoiler for 2015-2023 Ford Mustang
-Fits Bullitt, EcoBoost, EcoBoost Premium, GT, GT Premium

*Mounts with OE hardware

*Does not have holes drilled for wiring harness (dimples are present for drilling).

*Backup camera mount will need to be relocated from the OE black plastic taillight panel to the inside of the fiberglass trunk, this may require custom work.

*Check camera mount opening, excess resin may need to be sanded for proper fit, do not force camera into opening.

*Does not fit convertible model

*Hand crafted; approximate weight 17.0 lbs.(stock decklid weighs 21.0 lbs.)

*Shipped via ground truck freight only

*Requires normal pre paint prep; including sanding and primer. Occasional surface blemishes may be present as a result of the manufacturing process. These blemishes are removed during the normal sanding and preparation process required when painting any vehicle body component.

*Do not push hard on surface when sanding. Do not bake with paint curing lamp, allow to cure with ambient air temperature.