Forge Motorsports Pair of Uprated Intercoolers for the Porsche 997 3.6 Twin Turbo

Forge USA has (1) left. It is missing the silicone hoses. Discount to reflect the missing components. Hoses will not be offered for this. You will have to fabricate your own solution.

Following on from our huge success in developing intercoolers for the Porsche 996, we just had to take a look at the 1st generation Porsche 997.

Again we started with improving airflow through the intercoolers with the use of enlarged 60mm silicone hoses, and a redesign of the intercooler end tanks. Then with the charge air sorted, we looked at the cooling air that passes over the intercooler. In a similar fashion to the 996, testing showed that the original OEM ducting performed brilliantly. So, satisfied that it was up to the specification needed, we thought we should aim to make a true directly replacement kit, by designing the intercoolers to install perfectly with all the OEM mountings. The new intercoolers are similar in dimension to the OEM units, but are measurably thicker. The real improvement came with the complete re-design of the intercooler core, after testing proved a bar and plate design to be more thermally efficient in this installation.

In tests, the Forge unit managed an incredible drop in intake temperature of up to 40°C.  It was so dramatic we repeatedly retested and analysed the data, expecting to find we had made a mistake, but with the results substantiated, we knew this setup would allow the engine to produce more power and torque throughout the rev range;, and of course with the engine running cooler, engine longevity should also be improved.

The use of the original ducting and mountings results in very tidy and efficient install as seen in the above picture.

Our kit is supplied with all components required and comprehensive instructions. We can supply red, blue, or black hoses, simply select your choice in the options above.

Fitment:
Porsche 997.1/911 Turbo