Alaria Tech 370Z Differential Cooler Kit w/Nismo Cover

Alaria Tech 370Z Differential Cooler Kit w/Z1 Cover

Alaria Technical Manufacturing is proud to introduce our bolt-in Nissan 370Z Differential Cooler Kit!
For anyone that has driven their car in an environment that includes lots of consecutive twists and turns, you have most likely noticed the downfalls of the factory differential system. It is very common for racers to only see a few laps on a track before the oil in the differential gets well above its operating range, and in those cases you will see anything from unpredictable changes in how the car drives due to an overheated limited slip- to pressure build up and fluid escaping from the vent and spilling on to the track and the underside of your car. Both of these scenarios can become very dangerous when the car is being pushed to its limits. Overheating of the differential is also breaking down the fluid at a much faster rate than a fluid that stays in its optimal temperature range will. Fluid that is overheated and broken down will cause premature wear to your expensive drivetrain components like the ring and pinion and your high dollar limited slip differential.
We have worked for countless hours to provide a solution that includes nothing but high grade, motorsports quality parts and a design that is not only easy to install but also aesthetically pleasing.
What is included in the kit:
• Alaria Technical Nissan 370Z/350Z Differential Cooler Mount and Shroud in a durable black powdercoat
• Complete Stainless/ locking Install hardware kit
• Setrab Oil Cooler
• SPAL Fan pack and shroud
• Tilton fluid transfer pump
• Alaria Technical line and fitting kit utilizing XRP fittings
• Alaria Technical Adapter bracket and spacers for the Nissan 370Z chassis
The full set up requires very basic tools and a slight mechanical ability to be installed.
Wiring is not included at this time.
**Due to spatial constraints in the rear of the car, this assembly will not work with a factory exhaust, or aftermarket exhaust that fills the same location. We have verified fitment with most of the Single exhaust systems, but it should fit with many others, and there is always the option to trim the shroud if needed as we left plenty of room to do so.**