Radium Engineering 98-05 Mazda MX-5 Single Catch Can Kit

Radium Engineering 98-05 Mazda MX-5 Single Catch Can Kit

This catch can mounts using OEM holes and integrate perfectly with the surrounding components. The anodized aluminum catch can bracket mounts behind the RH headlight. NOTE: Because of the room needed for flip-up head lights, these kits are not compatible with the 89-97 MX-5 Miata or Eunos Roadsters.

SAE quick connect fittings are provided for both catch can ports.

The PCV catch can kit improves the performance of the crankcase ventilation system. The catch can runs inline between the PCV valve and the intake manifold. When the intake manifold pressure is close to or greater than atmospheric pressure, the PCV "check" valve closes and, thus, this hose experiences no flow. Conversely, the PCV hoses will experience "metered" vacuum when the engine is idling, steady state cruising, and decelerating. This would normally draw unwanted crankcase vapor, unspent fuel, and oil sludge into the intake manifold immediately after a high load run. 

INCLUDES
-Baffled Fluid-Lock® oil catch can
-Anodized aluminum bracket
-SAE quick connect hose ends
-SAE quick connect fittings
-Stainless mounting hardware  
-3/8" PCV rubber hose
-5/16" heater hose
-Cable zip-ties 
-Spring clamps

Installation instructions available at www.radiumauto.com Engine Oil Catch Can Kit CATCH CAN KIT, 98-05 MAZDA MX-5, PCV, FLUID LOCK Single catch can kit for NB Miata. Catch can located clear of popular turbo conversions.