SPL Parts Front Swaybar Endlinks GR86/BRZ/GT86/FR-S
$224.10
SPL front adjustable swaybar endlinks for the Toyota GR86 / GT86, Subaru BRZ, and Scion FR-S feature massive PTFE-lined FK 1/2" bearings to provide the highest load capacity for use with stiffer aftermarket sway bars. Custom heat-treated chromoly high-misalignment studs allow for extreme articulation angles (up to 65°) to prevent endlink bind when used with adjustable sway bars.
Unlike OEM, SPL endlinks are adjustable, enabling you to eliminate unwanted preload on the sway bars, set the ideal bar angle, and, if equipped with ride-height adjustable coilovers, properly corner balance your car. The result is better handling, more sway bar tuning options, and less variation in performance between right-hand and left-hand turns. Even stock cars can take advantage of this upgrade by simply dialing out the swaybar preload that occurs when you sit in the car to drive it and from the settling that occurs as the OEM suspension racks up miles.
Benefits
- Large Adjustability Range
- Eliminates Swaybar Preload
- Correct Swaybar Install Angle
- Lightweight, High Strength Construction
- Self-Cleaning, US Made, PTFE-Lined FK Bearings
Materials
- 6061-T6 Aluminum Turnbuckle (Anodized Black)
- FK PTFE-lined 65° Studded Rod Ends (F1 Spec, Self-Cleaning)
Easy, On-Car Adjustments
The 6061-T6 turnbuckles use opposing thread patterns (RH and LH) to allow you to adjust the length while it is still installed. Simply turn the turnbuckle to lengthen or shorten the link to the exact desired length and snug the jam nuts.
Noise, Vibration, and Harshness (NVH)
The front endlinks are a moderate contributor to NVH. They connect the body (swaybar is mounted to chassis) to the front struts which are hard mounted to the knuckles. This creates a rigid load path for tire vibrations to be transmitted to the chassis, resulting in more tire noise. How much more road noise is transmitted depends on several factors, namely the tires, speed, frequency of the noise, etc. Spherical endlinks can also make the occassional noise over asymmetrical bumps, like driving one wheel at a time over a speed bump or reversing out of a sloped driveway.
The front endlinks however, do not increase ride harshness.
Suitable for all uses, from daily driver to race car.
Sold as a pair. One pair per vehicle.
Confirmed Applications
2021+ Toyota GR86 (ZN8)
2013 - 2021 Toyota 86 / Scion FR-S (ZN6)
2013+ Subaru BRZ (ZC6/ZD8)
Replaces OEM Part Number(s)
This is a list of known OEM part numbers. OEMs constantly make changes to part numbers due to part updates, suppliers, etc so this may not be a complete list.
Toyota
SU003-00394
Subaru
20420-CA000
IMPORTANT INSTALL INFO
COILOVERS/SETUPS MAY ALTER ENDLINK LENGTHS
Some coilovers and/or setups may require shorter endlinks for proper clearance of the LCA. The OEM length range endlinks (SPL FE FRS) can be adjusted between 9.15" (232mm) and 10.65" (271mm). We offer a shorter endlink setup (SPL FES FRS) that can be adjusted between 7.40" (188mm) and 8.90" (226mm).
Installation Instructions