Link G5 Voodoo Pro ECU
$3,595.00
Link G5 Voodoo Pro ECU
G5 Voodoo Pro puts real magic in your hands and opens a new world of possibilities with the ability to control port plus direct injection, more injector and ignition drives, advanced communications and many more features.
With 12 Injection, 8 Ignition and 4 multi-purpose (inj, ign, aux) drives (24 total) the G5 Voodoo Pro can run up to:
- Twelve cylinders or six rotors with sequential injection and direct spark, or
- Eight cylinders with staged injection and direct spark.
The G5 Voodoo Pro is the perfect choice for professional level motorsport.
In the box:
- G5 Voodoo Pro ECU
- USB-C Connection Cable
- WiFi Antenna
- 4m GPS Antenna (Magnetic or Adhesive Mount)
- USB-C and SMA Dust Covers
- QuickStart Guide (A5)
- Installer I/O table (A3)
- Link stickers
Multi-purpose Injection/Ignition/Aux drives
G5 Voodoo ECUs make use of multi-purpose Injection/Ignition drives, allowing for highly custom setups, with sequential direct and port injection, or large cylinder count engines with direct spark
These multi-purpose pins open up possibilities for many different configurations. Any left-over drives can be used as auxiliary outputs.
Control Direct Injection (DI)
G5 Voodoo ECUs are a cost-effective solution to opening up the world of both Port and Direct Injection, with the use of an external OEM or aftermarket DI driver box, such as Link's DI Driver-4.
G5 Voodoo can run staged port injection and direct injection (DI), allowing you to add supplementary port injectors to a DI engine to supply more fuel to reach your power goals or to prevent carbon deposit build up on your intake valves.
Built-in WiFi, with real-time PC Link connection
Built-in Wi-Fi means you don’t need to be physically connected to the ECU, or even in the vehicle or on the same side of the pit wall to pull logs and make changes. No more fighting through roll cages or digging under the dash trying to plug in a cable
Multiple G5 Voodoo ECUs can be set-up on the same Wi-Fi network allowing you to switch seamlessly.
Built-in Global Positioning System (GPS)
Link’s high accuracy, high frequency GPS allows you to log position, ground speed and UTC time for data analysis at 50 times a second using Link’s Sensor fusion augmented GPS Technology.
This can be used for coaching, especially when connected to a driver analytics tool like MyRaceLab. It also allows you to be creative around setting up features or functions against position, real time or GPS speed.
Link’s GPS can also operate as a vehicle speed sensor for vehicles that don’t have one, giving you an accurate ground speed, such as some race cars or boats. It can be used to easily calibrate wheel speed and to compare wheel and ground speed to determine if tyre slip is occurring.
With Dead Reckoning Link's GPS will continue to calculate position when GPS lock is lost such as in a tunnel, garage or dense bush.
Onboard Digital Wideband Lambda controllers
All G5 Voodoo ECUs have built-in lambda controllers, saving you from having to run CAN wideband accessories for most install applications.
Dual microcontrollers
G5 Voodoo ECUs run off not one, but two microcontrollers (computers) for more processing power, with one dedicated to running the engine and the other to communications.
Dual onboard E-throttle (Drive by Wire)
Get a faster, more precise throttle response from up to two banks of a V configuration engine with dual E-throttle.
G5 Voodoo ECUs have fail-safe, solid state throttle relays, saving you from the hassle of wiring them in, making for simple E-throttle installation.
E-throttle outputs can be used for any H-Bridge control such as E-wastegates, meaning you can run both an E-throttle with an E-wastegate for example.
More auxiliaries than G4X, more options for bespoke configurations
G5 Voodoo ECUs can make use of unused injection and ignition drives as auxiliary outputs. Some dedicated auxiliaries such as E-Throttle or lambda, can be used as general purpose outputs when not used for their dedicated role too.
Included in these aux outputs are two H-Bridges, and four outputs capable of high-side drive. All outputs can do low-side PWM, and all regular auxiliary outputs are now protected from back feeding.
Seamless upgrade from G4X
G5 Voodoo A and B header plugs are identical connectors to G4x and are pinned very closely, so with only minimal re-pinning you can plug a Voodoo into a G4X loom or harness and get started right away.
G5 Voodoo runs on the same highly acclaimed PC Link software as G4X, meaning you don’t need to learn a new software package. PC Link allows you to easily convert G4X tuning Map files to a G5 version, allowing for quick and easy upgrades.