Collins Adapters - LS Engine to 350Z 370Z VQ 6-Speed Trans Adapter Plate With 11" Clutch Disc

This is it, Finally another 6-Speed Solution for the LSX family of engines! This compound adapter plate allows you to bolt up Any model Nissan “VQ” 350Z or 370Z 6-speed transmission to the GM LSX family of engines! This Adapter is made out of 6061-T6 Aircraft quality Aluminum. The adapter plate has the provisions to retain all of the stock Clutch and flywheel components of the LS1, simply swap in our Collins Performance 11" LSX to 350Z/370Z Clutch disc and you are ready to go!

This adaption Kit Includes:
• Collins Performance 11" LSX to 350Z/370Z 6-Puck Sprung Hub Clutch disc
• New input shaft seal 
• EVERY BOLT needed to assemble the bell housing to the adapter plate, and the adapter plate to the transmission.
• Pilot Bearing adapter needed to adapt the input shaft on the LS1 Crank
• Instructions are located on this site

You need to Supply the following:

You need the bell housing from 1998-2002 Camaro
You need the LS1 flywheel from a 1998-2002 Camaro
you need the LS1 Pressure plate from 1998-2002 Camaro
You need the T56 slave cylinder from 1998-2002 Camaro

we include the clutch disc, and adapter plate.

Simply cut the existing bell housing off of the front of the Stock 350Z/370Z/VQ 6-Speed Transmission. Then remove the front input shaft bearing cover, replace the pump cover gasket with Liquid gasket material. Bolt the adapter plate to the LSX bell housing, and then bolt the bell housing to the transmission! Install the LSX slave cylinder and install the transmission to the engine. It’s that simple!

Legal only for use in competition vehicles which may never be registered, licensed, and/or used on public streets or highways; and also for use in other exempted vehicles.