ER Spec Drift Car Roll Cage - Nissan 240sx 95-98 S14
from $695.00
*THIS CAGE WILL REQUIRE THE FINAL FIT, NOTCHING, AND WELDING TO BE DONE BY A QUALIFIED PROFESSIONAL FAMILIAR WITH INSTALLING ROLL CAGES*
Photo is for clarification purpose only. Actual part may vary. **S14 Sunroof will need to be removed for proper fitment.**
95-98 Nissan 240SX Roll Cage for Drift Car racing. 1.50" X 0.095 DOM Mild steel
Main Hoop and Roof Hoop Are Wider Than most cages and hug the chassis very nice.
Interior panels must be removed
Ment to be used with factory dash bar
Windshield runners fit in between the Dash and Door
Cage Includes Diagnol & 2-Piece Crossmember For Main Hoop
And Rear Strut Tower Crossmember
Add more strength to your ER Spec Cage, Choose type of dimple plates when ordering.
Dimple Plate Dimensions: 24" x 6" x 1/8
~~THESE CAGES ARE WELD-IN, NOT BOLT IN, AND DO NOT COME PRE NOTCHED~~
We recommend these be installed by a PROFESSIONAL fabricator experienced with installing roll cages. If you have any questions regarding bar placement or fitment please contact us prior to installing the cage completely.
Cage Material:
DOM Tensile Stength = 70,000psi
Diameter (in) 1.50
Thickness (in) 0.095
ID (in) 1.31
Cross Sect. Area (in^2) 0.42
Tensile Strength (lbs) 29,352
Weight (lb/ft) 1.426 lb
** Cages Are Built to order and can take ~1 week to build and ship **
Legal only for use in competition vehicles which may never be registered, licensed, and/or used on public streets or highways; and also for use in other exempted vehicles.