ER Spec Mazda FC Rx7 Roll Cage
$695.00
*THIS CAGE WILL REQUIRE THE FINAL FIT, NOTCHING, AND WELDING TO BE DONE BY A QUALIFIED PROFESSIONAL FAMILIAR WITH INSTALLING ROLL CAGES*
*THE IMAGES SHOWN ARE AN EXAMPLE OF WHAT CAN BE ACCOMPLISHED WITH THE MATERIALS PROVIDED AND NOT AN EXACT DEPICTION OF MATERIALS DELIVERED. THERE IS ADDITIONAL LENGTH ON THE DOOR BARS FOR BOTH LADDER AND X BARS AND ROOM FOR YOU TO BEND FOR ADDITIONAL CHASSIS CLEARANCE IF YOU CHOOSE*
This 85-92 Mazda RX7 (FC Chassis) roll cage is ideal for drift driving. The roll cage features sturdy DOM steel in its construction. The main hoop and roof hoop are wider than hoops on most cages, and they hug the car’s chassis perfectly.
There are several mandatory steps necessitated by this roll cage. The interior car panels must be removed for this cage to fit, the cage is meant to go through the dash, and the dash bar is included with this kit to further reinforce the cage. The windshield runners fit in between the dash and the door. The roll cage also includes a diagonal and 2-piece crossmember for the main hoop. Door bars will have to be bent if you want them to match the images shown, only straight material is sent for door bar material.
If you’d like to add more strength to your ER spec cage, you can choose your preferred type of dimple plates when ordering. The dimple plates feature dimensions of 24” x 6” x 1/8”.
Since these cages are weld-in, not pre-notched, they aren’t ideal for owners who want bolt-in builds. We recommend that these cages be installed by a professional fabricator, experienced with installing roll cages.
Order Now
A roll cage for your FC Rx7 is important if you’re thinking about modifying it for drifting. If a drift goes bad and you start to roll, this cage could save your life. While it is recommended you get professional help installing and implementing this roll cage, you can contact us if you have any questions about this product and its expected performance. Order your roll cage today!
Cage Material:
DOM Tensile Stength = 70,000psi
Diameter (in) 1.50
Thickness (in) 0.095
ID (in) 1.31
Cross Sect. Area (in^2) 0.42
Tensile Strength (lbs) 29,352
Weight (lb/ft) 1.426 lb
** Cages Are Built to order and can take ~1 week to build and ship **
Legal only for use in competition vehicles which may never be registered, licensed, and/or used on public streets or highways; and also for use in other exempted vehicles.