Condor Control Arm Bushings - E46 Conversion for BMW E30 & E36

"

Swapping in E46 control arms into your E30 or E36 will significantly increase negative camber by widening the track width and will also give you more clearance for more steering angle. Our conversion bushings are machined from UHMW due to its high rigidity and low coefficient of friction allowing for minimal suspension bushing deflection (geometry change).  We've designed them offset to re-center the wheel, and give your e30/e36 the correct caster. They will include a stainless-steel insert that tightly presses over the hex pattern on the E46 control arms.  You do not need to grind down your control arms or make any other modifications to your chassis. Please note that you will need to use E36 outer tie rods and E90 inner tie rods when installing in an E30 or E36.

*Please Note: Fits 21-22MM Hex.

**Meyle makes a standard e46 control arm and a Heavy Duty control arm. Some HD arms have a hex that is larger in size. These HD control arms may need to be shaved 1-2 mm for proper fitment.

https://www.youtube.com/watch?v=2U1EGm4c_iA

"

Legal only for use in competition vehicles which may never be registered, licensed, and/or used on public streets or highways; and also for use in other exempted vehicles.