GKtech Billet Aluminum Offset Castor Rod Inserts - Nissan 240SX S13/S14/S15
Price
$24.00
The GKTECH Billet Aluminum offset castor rod end inserts replace the inserts that go into the rose joint of your castor rod and give around 10mm more wheel clearance by moving the castor rod over. These are an easy DIY direct replacement that shouldn't take longer than 10-15 minutes to install.
- To suit rose joints that measure 18mm internal diameter and that have a width of between 21mm-23mm's .
- Providing that your rose joint is the size listed above these will fit S13 Silvia, 180sx, S14, S15, R32, R33 and R34 Skylines
- Machined from billet 7075-T6 aluminium and anodized for longevity
FAQ:
Will these fit with my castor rods?
We can only confirm that these fit our V1 and V2 castor rods. They do fit many other castor rods, however we can't test every castor rod that's ever been made. We can however tell you that if the rose joint on your castor rod has an internal diameter of 18mm's and is 21-23mm's in width then these will fit.
Do you make other sizes?
No, we don't. We only make the parts listed on our website and don't do any custom work.
What’s the advantage of these offset castor rod end inserts?
The inserts move the position of your castor rod over around 10mm's giving you more wheel clearance, as seen in the photo above this has moved the castor rod over enough that the wheel will now hit the swaybar before the castor rod.
Is there anything else that I need to install these inserts?
Nope, simply unscrew the bolt that holds the end of the castor rod in, slip out the old inserts and slip these ones in. Piece of cake!
We can only confirm that these fit our V1 and V2 castor rods. They do fit many other castor rods, however we can't test every castor rod that's ever been made. We can however tell you that if the rose joint on your castor rod has an internal diameter of 18mm's and is 21-23mm's in width then these will fit.
Do you make other sizes?
No, we don't. We only make the parts listed on our website and don't do any custom work.
What’s the advantage of these offset castor rod end inserts?
The inserts move the position of your castor rod over around 10mm's giving you more wheel clearance, as seen in the photo above this has moved the castor rod over enough that the wheel will now hit the swaybar before the castor rod.
Is there anything else that I need to install these inserts?
Nope, simply unscrew the bolt that holds the end of the castor rod in, slip out the old inserts and slip these ones in. Piece of cake!
No user install photos currently available.
Legal only for use in competition vehicles which may never be registered, licensed, and/or used on public streets or highways; and also for use in other exempted vehicles.
Manufacturer
GKtech
Item number
cstr-endx