ISR Performance VQ35DE Swap Mounts for Nissan 240sx S13/14
$428.45
ISR Performance VQ35DE Swap Mounts for Nissan 240sx S13/14
The ISR Performance VQ35DE swap mounts are designed to be your one stop solution for mounting the VQ35DE into both S13 and S14 chassis.
ISR Performance mounts feature a urethane engine and transmission mount bushing to help dampen engine vibration without being overly stiff, the perfect solution for daily driven, or track vehicles.
This kit will allow you to use a RWD VQ35DE engine and 6spd transmission and install it into your S13 or S14. Purchase the ISR Performance optional CD shortened shifter assembly to make for an even easier installation. When using the optional CD shortened shifter assembly you will be required to slightly trim the rear section of the OEM shifter opening in the chassis of the S13/14.
When using the ISR Performance mount kit and our HGC headers (Part Number : IS-SSHD-240VQ) you can purchase the LS swap Y-pipe (Part Number : IS-240LS-Y) which will bolt to these headers and to any of our cat-back exhausts. The headers and y-pipe are not included with the mount kit however.
What’s in the box:
- 1x left motor mount
- 1x Right motor mount
- 2x Base mount pedastal
- 1x Transmission brace
- 1x Transmission mount bushing
- 1x Hardware pack
- 1x Weld in transmission tunnel clearance kit
***Due to the larger size of the 350z transmission additional clearance to the firewall and the transmission casing are required. The transmission tunnel where the crossmember mounts also requires clearance. It is suggested to use the included weld in transmission clearance kit in this area for proper fitment. Hammering this area will distort the mounting holes and cause incorrect alignment.***
***ALL ISR PERFORMANCE PRODUCTS ARE INTENDED FOR OFF-ROAD USE ONLY***
Legal only for use in competition vehicles which may never be registered, licensed, and/or used on public streets or highways; and also for use in other exempted vehicles.