Supertech Forged Aluminum Pistons VQ35 8.8:1 (gasket+Deck height 0.082)
$762.96
Supertech Forged Aluminum Pistons VQ35 8.8:1 (gasket+Deck height 0.082)
Piston; For Turbo/Nitrous Applications; For use with Piston Ring SWN30131-0 [Nissan 350z(2003-2009), Infiniti G35(2003-2008)]
Our pistons are manufactured from extruded high silicon, enhanced 4032 alloy (with additional Cu, Ni & Mg) that has low thermal expansion, excellent wear resistance and higher thermal conductivity. Our pistons with this alloy have withstood up to 42psi of turbo boost, with alcohol, without any problems.
A 2 or 3 forging steps process yields a fine structural grain oriented in fibers in the same direction of the stresses.
Several heat treatments provide the piston with a high tensile strength and evenly distributed hardness. The pistons are submitted to several machining steps in specially designed machines and in conventional CNC. machines with special diamond tools for dimensional precision, perpendicularity and flatness of the ring grooves. Contact reduction grooves are standard. Honed & reamed pin bores for precise fit.
Wrist pins are constructed of cold extruded chrome moly steel for high strength to be used with wire clip locks.
Piston Set does not include rings
| Bore | Over Size | Comp Ratio | Volume CCs | Head CCs | Comp Height | Stroke | Rod Length | Pin Diam | Weight | Piston P/N | Ring P/N | Note |
| 95.50mm | Std | 8.8:1 | -10 | 57 | 1.168"(29.6mm) | 3.205" | 5.669" | 22mm(.866") | 370 | P6-N35-955-N10 | GNH-9550 | T/N |
| 96.00mm | +0.5mm | 8.8:1 | -10 | 57 | 1.168"(29.6mm) | 3.205" | 5.669" | 22mm(.866") | 370 | P6-N35-96-N10 | GNH-9600 | T/N |
Legal only for use in competition vehicles which may never be registered, licensed, and/or used on public streets or highways; and also for use in other exempted vehicles.